It has long been known that metal gable, etc. roofs need to be grounded, because they tend to draw a lot of static from the atmosphere. The proposed version of the Leiden Bank allows you to use this statics for your own needs.
The generator device is very simple. For those who have cardboard, "canteen aluminum foil" (such a roll), glue, scissors and a bit of wires, I suggest making a desktop generator from a pyramid! Fig. 1
We make the pyramid itself a "puff cake" (see picture). The most important thing is the order of the layers: outside "non-metal" (dry cardboard, plastic, etc.) and inside aluminum foil.
The number of "cake layers" is proportional to the effect obtained, well, "granite" helps, the thickness of the "non-metal" and the very size of the pyramid - only affect the "frequencies used" by the pyramid - ie. the larger the structure, the stronger the effects, since the "more windage" is.
Wraps granite stones in foil. see Fig.1.2
If you are too lazy to glue layer by layer. Then you can just make a pyramid out of plywood wood. But still, EVERY granite pebble should be wrapped in food foil. Additional foil in the walls greatly enhances the effect.
Promotional video:
Questions.
What is the M12 Stud? Stud М12 is a steel structural bolt. M12 is a 12mm metric thread.
Should the foil be in contact with the gravel? The one that “the walls of the pyramid - NO !!! The pebbles themselves - yes, that is. they are like candy wrapped in foil - it's like baking potatoes in foil. Do I need to short-circuit the interconnected foil layers in the wall ???? NOT!!! Do everything EXACTLY according to the drawing !!! The foil in the wall must not come into contact with the bottom grounded plate.
The captions in the picture are all clear - but where to get granite? Go outside - there are a lot of granite chips around - our favorite gravel. Or collect at the nearest construction site. It is necessary to wash the granite chips well from dirt and dry well.
Collect "dry".
- "Backfill" inside to a layer of "granite chips" - you can play with the sand, if there is no gypsum, or you don't need to fill it up - the effect will still be …
-Some effect will even be with the option “just a pin inside” (you can simply attach the wires to the inner foil layer) and an empty pyramid standing on a conductive “ground” stand.
- play with orientation - interesting experience.
And here is a photo of a prototype with granite. Working Fig. 2
You can also solder an antenna with a mesh from the top of the prototype. If you wish.
Epilogue.
Where on the right below (+) and (-) - connect a "tester" (voltage meter) there and look at the result. Different values for different designs - but 1.2-2.5 Volts can be obtained, from a pyramid about 20 cm. It should be enough to power a clock and a small radio receiver … And if you add a big one, then more …
I deliberately do not complicate the "experience" - because in reality "granite capsules" need to be done a little differently, but this is for a stronger effect - for those who want to produce table toys "pyramid-source of energy".
For those who understand how the world works, that from the material lying under their feet and KNOWLEDGE is able to create “eternal sources.
Alexander Soroka