Drawings of Egyptian religious buildings with images of moving large stone sculptures have survived to this day. From the picture given here, it can be seen that a small part of people pulls the platform on which the sculpture of the pharaoh is installed and insures it from overturning, while the other part stands aside with sound instruments in their hands, the sound of which is necessary to levitate the platform with the statue. The opinion is expressed that a flat platform is a special technical device - a generator.
About its purpose and structure, there have been disputes between scientists-Egyptologists for a long time. The source of the platform's energy generation are small asymmetric pyramid-rhombuses that are supposedly layered in it. They are like crystals that "inhale" one energy and "exhale" another. These platforms, under the influence of sound or other sources of influence, were put into a state of soaring above the ground. In the presence of a load, the platform with its runners only slightly touched the ground, making it easier to transport it.
And in this example, the levitating movement of the stone load is reduced to the same 2 factors set forth in the 2 previous cases: the presence of a torsion radiation source penetrating the levitating object and sound accompaniment.
The Egyptian pyramid of Cheops in Giza is the oldest and at the same time the only wonder of the world that has survived to this day.
The question of the method of construction of the Cheops pyramid was also raised, including the delivery of bulky and heavy stone blocks to a height of 150 m, which approximately corresponds to a fifty-story skyscraper. The base area is 230x230 m. In such a space, the five largest cathedrals in the world could freely fit at the same time: St. Peter's Cathedral in Rome, St. Paul's Cathedral and Westminster Abbey in London, as well as the Florentine and Milan cathedrals. All the churches in Germany created in the last millennium could have been built from the building stone used to build the Cheops pyramid. And hardly any of the listed structures were erected with the same precision as the Great Pyramid. Although the pyramid contains several burial chambers, this structure cannot be called hollow;it is almost completely filled with two and a half million limestone slabs. Each weighs an average of 2.6 tons, giving a total weight of 6.3 million tons.
We can only marvel at the skill and technological achievements of the ancient builders, because, in addition to the amazingly accurate geometric referencing, they were able to carefully polish and place white limestone slabs on the outer surface, having brought them from the other bank of the Nile, from the quarries of Tours. Judging by the slabs preserved at the foot on the northern side of the pyramid, they were even larger than those used in the center of the pyramids; each weighed about fifteen tons.
There is an Arabic text that informs about the construction method of the Great Pyramid: “Large sheets of papyrus were placed under the stones, on which many secret words were inscribed; then they hit the stone with a stick, and he moved through the air at the distance of the arrow's flight. Thus, in the end, he reached the pyramid”(M. Kuczyński,“The Riddle of the Phaistos Disc and the Snake Worshipers”).
Promotional video:
There are also opinions that stone blocks were moved to the top of the pyramid with the help of special platforms, made like those used to move stone sculptures. And the platforms with a load already by means of sound the builders could enter into a state of levitation.
If for Egyptologists the question of the method of erecting a pyramid and raising stone blocks to a height of up to 150 meters still remains unresolved, then people who are able to see the past (clairvoyants) report that the stones themselves flew up a special energy channel. This energy channel was created by builders using technical devices in the middle of the eastern side of the pyramid (from the Nile side). Research allegedly showed that multi-ton stone blocks delivered to the base of the pyramid were subjected to energy processing by generators to weaken their gravitational interaction with the ground and increase interaction with the energy flow channel upward along the pyramid. After that, the blocks were fed into the receiver of the power channel by means of a rope-block tilter and flew up to the place of laying. The channel's energy flow was created by a kind of solenoid-transformers mounted on one axis along the pyramid wall. As the height of the pyramid increased, the device that created the energy channel was lengthened (increased).
There are also cautious assumptions that the basic knowledge and components of the described technical devices have been preserved and are located in underground storage facilities near the pyramid of Cheops and other places in Egypt. They were no less valuable than the treasures of Cheops and were not destroyed. Bulky technical devices descended into the dungeons by means of special elevators, and their entrances were securely walled up.
In the monolithic stone base of the pyramid, there are hollow spaces, where under the very ceiling, heavy granite blocks are installed in a tent-like manner. Their installation was also probably carried out in a state of levitation.
Andrey Kleshnev