- First part - Second part - Third part - Fourth part - Fifth part - Sixth part -
Today we will continue to survey the 1.2 km crevasse that leads up to the first Column Façade, in giant granite melts, to check for the correct configurations. So we spotted two "security guards", in Russian - "watchmen" - sitting on a bench, not suspecting that they have such correct lines behind them!
And this - we entered from the other side, and took a picture of these 2 watchmen from the other side, because they - to be stunned and not get up - are sitting near such a structure! And such a giant monolith hangs over them! On the surface of which you can also guess the places of the correct striation! This is another example for you that the “Third Eye” is either there or not! You either see it or not!
Now we will show you something on these megaliths, which suggests that these giant megaliths were made here - right on the spot, well, at least some; and they did not budge! Well, like, as now they are doing the formwork and pouring the cement. But the ancient technology was even more interesting! Here's a look at the wall:
Do you see such black twisted lines all over the wall? - These are GASKETS! They are stone! They were, of course, straightforward! And the degree of tortuosity of these stone pads now shows the degree of melting of the stone! The fact that the gaskets used to be straight-line is evident in other places. Look how this black pad stretches! It goes without saying that this black stone gasket curled when melted.
Promotional video:
Let's take a closer look at the gasket! There she is! Moreover, the thickness of the gaskets depends on the size of the monolith! There are generally 10 centimeters thick.
Of course we wondered what kind of stone it is? - Very hard! BASALT immediately comes to mind! Well, let's say that since the megaliths were built gigantic, and the “cement” from which it was made was initially loose, they were covered with layers, and basalt pads were laid between the layers for the internal strengthening of the monolith. Something like this! And we have known for a long time that BASALT is an artificial stone produced by VCC. Take a look - right in front of your nose - just part of such a monolith gasket:
And in the background on the left is a small melted stone. You see, the gasket withstood in the monolith, but in a small stone these gaskets coiled like wool in a ball! Now we will show, point-blank on a small area, these black (they are gray, because they are dusty) gaskets run parallel to each other:
There are also vertical spacers. Look at this photo, in general, the entire square pattern of the wall has been practically preserved, because these gaskets, both horizontal and vertical, have been preserved!
Here, just two parallel vertical seams are preserved with thin black spacers:
And here you can see how in a close-up, 2 vertical black seams are tracked! Here is the impression from the outside that as if the bitumen is squeezed out of the crack, but you feel it! - the hardest black stone!
Here one reader expressed his thoughts about these pads: “Hello. Regarding the last issue, where you gave a photo of megaliths with black basalt layers, an association immediately came to mind - laying paving slabs:
The tile is made of concrete, but the seams between the tiles are covered with sand, aka quartz, aka silicon dioxide. Surprisingly reliable and durable construction - for example, picking out the tiles from the middle will never work.
It turns out that all these megaliths were simply laid with sand, for strong fixation. During a thermonuclear explosion (or similar), the sand melted and turned black, turning into basalt”. - Good version. But look at how often these gaskets go sometimes, here in general the “square-nested way”!
But look how you can clearly see here:
Here, along the bottom edge, the gasket became wavy. But a little higher, it is generally perfectly horizontal. And above is also a horizontal gasket. And you can see the shifted vertical seams! - We also want to show such a characteristic corner with all these joints and seams:
Thus, we introduced you to the ANTIQUE technique of creating granite megaliths with strengthening the layers with basalt pads!
And you can just walk along the crevasse and see from the tortuosity of the basalt gaskets how the SUPER-temperature buried megaliths here!
So, having passed this 1.2-kilometer crevice in giant granite monoliths, we go out to an area of 50 by 200 meters in cross-section and run right into a huge
Facade with COLUMNS!
This façade is famous in travel agency brochures. And Zio-Freemasons use COLUMNS as their symbol!
Here is the standard Zio-Masonic symbol. - 2 COLUMNS! In one case, between them EYE VCC! And in another there is the Jewish crown of the Torah - CHECK!
Now we will take a closer look at this facade with columns and in general this site. Here we come out of the crevice and turning our head to the left we see the following view:
Well, you see, the facade, a cafeteria built from some kind of bushes, 2 green dry closets “ME and ZhO”; and the rocks in this direction - in this direction the trail of another route climbs - dangerous - only young people with a guide. And this is - this is opposite the FASADA - the crevice from which we have now left. We have hinted at the outlines of the deformed blocks:
Firstly, I must say - and it will be easier for you to perceive it, because we only said in the last issue - that THEY made megaliths on site from some kind of granite "sand / mixture", and put basalt pads between the layers. Here in this granite megalith, on which the facade is with columns - these basalt pads are very thick! In this picture on the left, they - spacers - are clearly visible at regular intervals:
We will hover closer:
At the top is a goblet, which is actually a Jewish symbol of Kiddush. But this is not the main thing now. The main thing is to understand the level of technology that carved this facade out of the strongest granite! These are not granite chisels and hammers! Dismiss! - The whole structure gives the impression that it is carved like a knife in butter. It's easy to see this by working out! No fool waved chisels here. It was cut very simply - it was fitted like a plasma cutter, like a CNC machine, and it was cut automatically, in one cut of the cutter. There is no doubt about that. Work - First class! Here we will show at least the edge of the niche. THEY first carved a niche in granite, and then carved it figuratively. There is an interesting track like a tractor between the niche and the first column.
On the other hand too:
We will give you some of our pictures to convey to you our feelings, which led us to the following conclusions:
This is by no means an alleged "building" - what the officialdom is trying to sell us. There, behind the entrance - behind the columns is a very neatly carved large room - and nothing else! That is, given the virtuosity of cutting on granite in such volumes, which, seeing the quality, could only be automated, the presence of only one room inside clearly shows that this is NOT a building, but a MEMORIAL! If you like, HEADSTONE! Well, they flew from the mother planet, they look - from the huge granite MEGapolis - one smoking melt - they were late! And the aliens have already landed on Earth in large numbers and cannot be overcome; then on the sly, the astronauts carved out memorials and flew to their VCC.
And understand! On this planet - THE DECISIONERS - ALIENS; although this word is vulgarized and its boundaries must be understood; but it is so! It's their eye sticking out of the TRIANGLE - it's not an EARTH'S EYE!
Read the continuation here.