The region of the city of Cusco is rich in numerous ruins of ancient buildings, some of which have a gigantic character. The same giant blocks as in the walls of Saxahuaman can be found in Ollantaytambo, located 60 km northwest of the city of Cuzco. Ollantaytambo lies about 3000 meters above sea level. The name of this small settlement - Ollantaytambo - means in the local dialect Quechua "the storeroom of my God".
The settlement itself, like the city of Cusco, lies in the sacred valley of Urubamba, along which the river of the same name flows. The central attraction of this place is the remains of an ancient city with numerous terraces scattered along the slopes of this valley.
Let's find out more about it …
As in Cusco, in Ollantaytambo one can see the layering of the structures of our dwarf races on the later structures of the giant races. This is clearly seen on the example of Ollantaytambo. From the photographs, you can see that the giant building blocks are found only on the top of the mountain (scattered), as well as in the first row of terraces (but only in the first). All other buildings (including the terraces themselves) are built of small cobblestones. These facts indicate that at first the giants-Lemurians settled on the top of the mountain, who possessed an amazing technique of stone processing. They built a number of buildings on the mountain. After natural disasters, accompanied by powerful earthquakes, as a result of which the giant buildings were destroyed, this cyclopean culture died out. Traces of natural destruction of buildings are visible in various hard-to-reach places of the valley,where giant building blocks lie scattered. Locals call these giant blocks "weary stones" (Spanish piedras cansadas). After the earthquake, these areas of Lemuria sank to the ocean floor.
After many, many, many centuries, this land rose to the surface, and our dwarf races settled in these places, which used the remains of giant buildings for their own purposes. Therefore, the walls of the giant buildings formed the first, uppermost tier of terraces, and all the lower terraces were made much later from small cobblestones. Due to this close layering of cultures, it is impossible today to accurately recreate the original structures of the Lemurian giants.
Of greatest interest is the technology of stone processing and the technique of bundling blocks into walls. The photographs of the remains of the giant walls show protrusions of various shapes - linear, dotted, dotted. As can be seen from the preserved intact walls (for example, in the first tier of terraces on Mount Olantaytambo), point-like protrusions are located on the outside at the bottom of each building block. In other photographs, you can see that linear and dotted protrusions are located on the inner sides of the building blocks, which speaks in favor of the version that these protrusions served for a strong bond of the walls.
Promotional video:
That is, when the blocks were laid in the walls, the protrusions of a certain shape entered the grooves that had the same shape on the adjacent block. Due to this, the strength of the masonry was achieved, in which no liquid binding solutions such as cement, etc. were used.
If you look at the photo of the quarry, from where the Lemurian giants mined building blocks for their buildings, then one has to wonder how these blocks were cut, cut down or carved. By the absolutely flat shape of the niches left in the rock, we can conclude that the Lemurians used some other technology, different from the one known today. In our time of the fifth root race, the following quarry technology is used: holes are drilled in the rock in a linear row, into which wedges are then driven, forcing the required piece of rock to break off along the line of holes. Previously, this work was done by hand, then pneumatic tools were used, and today this work is done by fully automated huge machines.
But in all these cases, the same technology is used, as a result of which on both sides - both in the rock and in the block - there are grooves from the drills in the form of parallel lines. These modern blocks can then be cut with circular rotating diamond discs into slabs, cubes and other regular geometric shapes with smooth surfaces. But the original stone block has drilling marks. All of this is not seen in Lemurian technology. There are no traces of drilling or crushing in the quarries - only even niches are visible, as if someone with a giant knife cut blocks of plasticine rock with a giant knife. The building blocks themselves have an irregular shape, which, nevertheless, fits so tightly to each other that there is practically no distance between adjacent blocks.
Manual (top) and mechanized (bottom) modern quarries. The photo below shows traces of holes made by a quarry machine.
A quarry located near the town of Olantaytambo, from where the Lemurians mined building blocks for their buildings. Pay attention to the characteristic dotted projections and smooth surface of the niches.
Moreover, as in the Lemurian quarry, so on the blocks you can see strange point protrusions that do not fit with each other - if there is a protrusion on the block, then in its place in the quarry, in theory, there should remain a depression. But in reality, both there and there there are only protrusions, which is very illogical and therefore surprising. Likewise, the functional purpose of these point-like protrusions sticking out of each block is completely unclear. These protrusions do not serve for bond strength as, for example, protrusions on the inner faces of these blocks. Then there is only one purpose of these projections - for transportation. But how were these giant blocks, weighing tens and hundreds of tons, transported along the steep slopes? There are more mysteries than clues …
It is interesting to see a fragment of the Cyclopean Wall at the top of the mountain next to the terraces of Ollantaytambo, showing ornamentation and thin stone layers between the building blocks. It seems that these flat interlayer stones were once not stones, but soft sponges filling the space between huge building blocks. Again, the impression is created of the softness of the rock matter, which was such during the construction of these structures.
From all the above facts, the following assumption can be made. We know from the Secret Doctrine that these gigantic structures belong to the late subraces of the Lemurians, who, according to the same Secret Doctrine, possessed certain magical powers that modern people have completely lost. It follows from this that the Lemurians used their superpowers in everyday life, and in particular in construction. The characteristic shapes of the blocks and niches left in the quarries indicate that the Lemurians had the ability to soften the stone. If we remember that the Lemurians (due to the then evolutionary stage) possessed a colossal amount of Psychic Energy, which prevails over all physical laws, including matter, then it becomes clearthat the Lemurians were able to perform the most amazing miracles from the perspective of our civilization today. With the help of Psychic Energy, it is possible to soften any matter to a plastic or jelly-like state.
Fragment of the construction of the Inca Palace in the city of Cuzco. This photograph shows the same point-like protrusions as on the blocks on the terraces of Ollantaytambo. These remains of the giant walls were supplemented by the masonry of small cobblestones of modern Peruvian builders.
In the records of Helena Roerich's dialogue with the Teacher, there is the following phrase of the Teacher dated April 15, 1929: “Notice how a seemingly solid surface can worry. This is the decomposition of lower matter by means of psychic energy. Thus, with the help of their Psychic Energy, the Lemurians softened rock matter to a jelly-like state, cut it into huge blocks of arbitrary shape, transported these blocks through the air using telekinesis to the construction site, and there they laid them in the walls, adjusting these plastic blocks one to one. by the same method of softening rock blocks to a plastic substance, giving them the desired shape in place. Only in this way can one explain the strange shape that the giant buildings of Ollantaytambo, or the Inca palace in the city of Cuzco, the walls of Saxahuaman, the ruins of Tiahuanaco have,ahu pedestals on Easter Island and other similar buildings.
It is interesting to draw a parallel between the walls of the Inca Palace in the city of Cusco, which lies in the same Urumamba Valley as Ollantaytambo. The same characteristic protrusions in the lower part of the huge blocks are clearly visible. But the building blocks of Ollantaytambo have a more even (close to geometric) shape. That is, Ollantaytambo's technology is more advanced than the technology of the Inca Palace. Therefore, it can be assumed that the buildings of Ollantaytambo arose later than the Inca Palace.
But these two buildings are united by one feature - point protrusions on the outside of the blocks. Based on these common features, it can be said that the walls of the Inca Palace and the walls in Ollantaytambo were built in the same era, using the same technology. Of course, it is difficult to believe in the reliability of the theory of modern archeology, attributing all these buildings to the Incas who lived in the 13-16th centuries A. D. modern archeology has no idea about theosophical anthropology, which alone can explain all the archaeological "miracles" of gigantic buildings, before which modern science gives in. If we follow the theosophical picture, then the central Andes were once part of the Lemurian continent. It was at this time that the Lemurian giants, whose height was about 18.3 meters, built buildings from huge stone blocks,which have partially survived to this day in the form of the ruins of Saxauaman, Tiahuanaco, Ollantaytambo.
Near the cyclopean ruins of Ollantaytambo there are ruins of dwarf buildings (compared to the cyclopean scale), which look like terraces. But why were these terraces built by dwarf (our size) races? As can be seen from the photographs, the terraces are located not only on the mountains near the town of Ollantaytambo, but also on the slopes of neighboring mountains, as well as in the neighboring valleys a few kilometers from Ollantaytambo in a place that today is united by one name - the Historical Reserve of Machu Picchu (Spanish. Santuario Historico Machu Picchu). In this reserve there are about fifteen remains of mountain terraced villages. Let's name just a few of them: Machu Picchu - 2400 m above sea level, Llactapata - 2600 m above sea level, Winaywayna - 2700 m above sea level,Phuyupatamarca - 3600 m above sea level, Sayacmarca - 3600 m above sea level. All of these mountain settlements (as well as others) are located near fertile valleys on the slopes of the mountains.
What made the ancient inhabitants of this region climb the mountains? - Only the sea masses of water that filled the valley. That is, there were times when the central Andes were much lower than today's sea level, so much so that only the tops of the mountains protruded from the ocean, forming a kind of island region such as today's Micronesia. As the Secret Doctrine says, this happened at the time of the sinking of the continent of Lemuria, when the time of the Atlantean existence came. And only with the advent of the Aryan race - the Fifth Root Race - the continents that we have today rose to the surface. And along with them, and some parts of ancient Lemuria, and in particular the central Andes (as well as Australia, Madascar, New Zealand, the Pacific Islands).
It can be concluded that the Ollantaytambo terraces had the same fate as Easter Island - the Lemurian buildings were destroyed by an earthquake and sunk to the bottom of the sea, and then at the dawn of the fifth root race they were gradually raised to the surface. Thus, the giant parts of the terraced buildings of the Peruvian Andes arose in the Lemurian period, and all other buildings made from small cobblestones that arose in their place were made by representatives of the present Aryan race, when these lands gradually rose to the surface of the ocean. In particular, all mountain terraces and cities were built when the Andes only partially rose from the ocean, i.e. when the Andes were an island region. That is why its inhabitants solved the problems of the lack of fertile land by building mountain terraces. Over time, the Andes region rose,and the ocean freed the fertile valleys, where the terrace builders moved. In the valleys, more recent buildings arose, dating back to our historical era. Often, these structures of the ancient Incas arose on the site of the giant ruins of the ancient Lemurians, which is the case, for example, in the city of Cuzco - the magnet of the place works even after millions of years.
Theosophy provides clues to many questions of modern archeology. Of course, today's official science, advocated by the fifth Root-Race scholars, will never accept theosophical anthropological doctrine. But the Secret Doctrine and Living Ethics are given for the next root race - the sixth, representatives of which have already been embodied in different peoples. It is for them that this article was written, it is for them to develop a new archeology. Dare young archaeologists-scientists of the sixth race! - the future is yours, because the truth and the forces of evolution are on your side!
Pinpoint protrusions on blocks at the top of Ollantaytambo terraces, as well as thin stone interlayers between individual building blocks (side view).
Here are some more theories:
The Spanish chronicler Garcillaso de la Vega, in his book, cites the fact that, according to him, took place: one of the Inca rulers decided to deliver the "tired stone" to the construction site. He gathered 20,000 Indians to drag him on the ropes. The attempt was tragic. A rock over the cliff fell and crushed about 3,000 people. By the way, "tired stones" lie not only on the road leading to the quarry, but also on the territory of the village in the direction opposite to the quarries.
Let's imagine that the Indians could move stones along the ground. But how did they ferry them across the stormy river? Riddle.
When you look at stones of different size and shape, the thought arises that they were first softened to the state of clay, or wax, and only then, in an incomprehensible way, they were cut in a specially given shape.
Besides gold and bronze, the Incas did not know any other metals. The question arises: how did the Incas process giant stones from the hardest rocks ?? Experts say that it is possible to process the stone in this way either with a high-strength cutter or with a laser, and the official version says that they processed the blocks by hand using primitive tools. Meanwhile, there are no traces of tooling on the blocks. Their surface is carefully polished.
Many masonry blocks have small paired protrusions. But, in order to make them, it was necessary to remove a layer of stone from the surface, the thickness of these protrusions. For what?? For what purposes did you need to spend so much effort?
Some monoliths have multiple cutouts corresponding to cutouts of adjacent blocks. (Imagine the Incas, with primitive tools making these grooves with millimeter precision.) This achieved phenomenal block bond strength. But, how did the Incas stack stones of many tons so that the grooves of two neighboring blocks fit into each other? Why and who needed such extreme adhesion strength?
Many blocks have concavities very similar to giant finger prints. Who are they, giants, collecting, like puzzles, multi-ton stones in cyclopean structures? What tools did they use to cut multi-ton blocks? How were they delivered? Questions, questions, questions…. Questions to which there is still no answer.
The "polygonal" technique of laying giant blocks is no less a mystery. How were monoliths weighing tens of tons stacked so that skillfully cut corners and grooves on neighboring blocks fit into each other like parts of a children's designer? There is a hypothesis, based, however, only on Indian legends, that the ancient Peruvians were able to soften granite with vegetable juices to the state of plasticine. Later, the surface of the stone hardened and acquired its original properties.
And one more curious fact. In the Cyclopean masonry of Peruvian buildings, there are blocks with one or two trapezoidal ledges. Their functional purpose is not clear. Most of the blocks do not have such protrusions. Such a technological method (a granite block with protrusions) is found, besides Peru, only in one place on the planet. Namely, in the facing of the great pyramids of the Giza plateau. How can one explain the presence of such a specific architectural element in two civilizations remote in time and space?