Hello everyone, today I will show you some photos of ancient stones with traces of technological tools. I will also give my opinion about these tools and their capabilities.
Many ancient structures and their ruins have survived on Earth, among the fragments of which there are stones with incredible traces of processing. In most cases, these tracks are similar to modern technologies, and sometimes even surpass them.
Such traces raise questions not only among the humanities, but also among the time-hardened techies. The very first of these tracks is shown in the main photo.
It was found by a team of researchers from LAI in Hatus (Turkey). This stone has remained intact for many millennia, so the possibility of a trace appearing in the next hundreds of years can be completely excluded. This means that it was abandoned several thousand years ago.
Official versions of history exclude the possibility of the existence of ancient highly developed civilizations, but how then to explain the existence of this trace? It is a fact, and they require explanation, not disregard or fitting to theory.
This trace tells us about the presence in antiquity of a tool that resembles a modern circular saw in shape.
Now it is difficult to say whether it was portable or stationary, but it was intended for working with hard rocks.
Promotional video:
Based on the diameter of the cut, several definite conclusions can be drawn. The instrument was large and required a lot of energy to power it.
This all sounds fantastic when it comes to thousands of years ago. However, traces from such instruments are not isolated, which means that this is no longer an accident, but a pattern.
Sometimes there are traces not only on stones, but even in the mountains.
It is difficult to draw a specific conclusion from the photograph, but the tool worked impressively here. To make such tools, high technology is needed, not to mention the provision of energy to keep them and work.
When compared with our time and technologies, one can imagine a similar form of that mechanism, but if we are talking about a highly developed civilization, then such a comparison may not be correct.
Among the ancient ruins, you can find smaller traces, but no less amazing in terms of technology.
In recent years, scientists have tried to explain such traces, but all their attempts do not stand up to criticism. I will briefly explain to you from the photo below what high technology is about.
The photo shows a very fine cut on a granite block. Granite is one of the hardest types of stone, and for its high-quality processing you need tools of greater hardness.
Despite the great difficulty in processing granite, the Egyptians had one cunning method. It consisted in the use of copper tools and harder substances as an abrasive.
In this way it was possible to make holes or cuts in granite or basalt blocks.
The method is good, but why doesn't it explain the cut in the photo above? In order for such a small cut to come out, the thickness of the cutting edge of the tool should not exceed 1-2 millimeters.
If you add an abrasive to it, then the thickness of the cut comes out 2-3 times more than the edge of the tool. In simpler words, using the technology of abrasive and copper tools, a cut of such a thickness cannot be obtained due to technical capabilities.
I dare say that making cuts of this thickness is on the verge of modern technology. In addition to the usual traces, on some ancient monuments you can find traces of unknown instruments, which we have no analogues even in our time.
In this case, I will not assume anything, all that remains is to fantasize, because our civilization has not yet reached such heights.
Examining and analyzing several photographs, we were able to make sure that there was an unknown civilization in antiquity, whose development is amazing.
In this case, we are talking about facts that require the most careful analysis and further study.