In secret area S4, all technological aspects of flying saucers were investigated. Scientist Lazar dealt with the question of the physical basis of the movement of these devices. He, like other researchers, believes that it is all about gravitational forces and how they are controlled. The space-time system is based on gravitational interactions, therefore, having mastered them, you can arbitrarily change this system or, in other words, move in it. The power plant of the flying saucer creates various gravitational waves that change the gravitational field.
A change in the gravitational field does not only mean a change in the forces of attraction-repulsion of the plate. First of all, the curvature of space occurs. Observed UFO phenomena such as instantaneous disappearance, turns at almost impossible angles, changes in shape and color, occur due to the distortion of space around the UFO. To get from one point in space to another, no matter how far it is, it is necessary to curvature the space so that these points are as close as possible.
The shape of the ship is chosen so that with minimal energy consumption it all falls into the zone of maximum gravitational disturbance and space curvature. A "gravitational bubble" is formed, containing a plate inside. With this mode of operation, it can become invisible to an outside observer, although it will be in the same place. The light coming from the object behind the flying saucer will go to the observer not in a straight line, but bypassing the “bubble”, creating an illusion for a person that there is nothing between him and the object.
The right figure shows the lines of force of electromagnetic waves under certain conditions - a phenomenon that can occur in nature. The left one shows how the shape of a flying saucer fits into this physics. Blue color - area of circulation of gravity flows. Scientists from S4 believe, therefore, that the idea of a disc shape does not come from aesthetic, aerodynamic or other reasons, but only from the laws of wave physics.
The entire propulsion system of the ship consists of two components: field amplifiers and a reactor. In the lower part of the plate, there are three amplifiers in a circle, above which, at the next level, there is a reactor, which is a small hemisphere with a pipe extending vertically upwards.
The diameter of each amplifier is about 60 cm. The amplifiers can deviate from their vertical axis and, as Lazar says, represent the only part of the cymbal that can move. The ability to move the field amplifiers is necessary to create various forms of traction. There are two schemes for the operation of amplifiers, which are fundamentally different in terms of reproducible effect: Delta configuration and Omicron configuration.
Promotional video:
Appendix to the magazine "Reality". Compiled and translated by Vyacheslav Lopatin